Products & Solutions FAQ

  1. HOME
  2. Products & Solutions
  3. FAQ

LvBLEND・RfBLEND・LtBLEND

  • Q. In which direction is the impeller turned?
    If the impeller is shaped as shown in the photo on the home page, you can rotate the impeller counterclockwise to achieve the specified performance.
  • Q. What are the advantages of low torque?
    When the torque is lower, you can make the mixing shaft thinner. If the mixing shaft is thin, the shaft seal shrinks, so you can downsize the frame for the motor and motor reducer, ultimately reducing costs.
    Furthermore, you can decrease maintenance costs for the shaft seal unit.
  • Q. Can I purchase only the mixer?
    Yes. However, we do not recommend replacing only the existing impeller with a new one because the power may be lower than the existing impeller. Therefore, we recommend you replace the impeller together with the motor reducer.
    If you have other questions, please contact us.
  • Q. Can I combine impellers in three stages or more, or combine each impeller?
    You can combine impellers in three type-1stages or more, or combine each impeller. However, the appropriate number of impeller stages and combinations vary depending on the desired functions, operation methods, etc. We suggest the appropriate number of impeller stages. Please contact us for details.
  • Q. What is the maximum viscosity?
    This refers to the viscosity area equivalent to the general-purpose impellers (paddle impeller and turbine impeller).
PageTop